Can I Connect A Turntable To Sonos? A Step-By-Step Guide

Are you a vinyl enthusiast who also loves the convenience of streaming music through your Sonos system?

Good news – you can have the best of both worlds!

Connecting your turntable to your Sonos system is easier than you might think, and it allows you to enjoy the warm, rich sounds of your vinyl collection throughout your home.

Whether you have a portable turntable or a high-end setup, there are Sonos components that will work for you.

In this article, we’ll explore the different ways to connect a turntable to Sonos and give you all the information you need to start enjoying your vinyl on your Sonos system.

So grab your favorite record and let’s get started!

Can I Connect A Turntable To Sonos

The short answer is yes, you can connect a turntable to Sonos. However, it’s important to note that not all Sonos components have the necessary inputs to connect a turntable directly.

If you have a turntable and third-party speakers but no amplifier, you can connect them to the Sonos system directly using the Sonos Amp. Simply take the audio cable that comes with your Amp, plug one end into your turntable and the other end into corresponding colors of the L/R inputs at the back of your Sonos Amp.

Alternatively, if you have a Bluetooth-enabled turntable, you can use the Sonos Roam to beam the audio to the rest of your system. However, it’s important to note that while you can connect the Move to a Bluetooth turntable and play audio, you won’t be able to group it with your other Sonos speakers (Wi-Fi-only) so that the vinyl audio is playing in a multi-room system.

If you’re looking for a turntable that transmits audio directly to a Sonos system with no extra hardware required, the new Victrola Stream Carbon turntable offers just that. Priced at $799, it requires no additional equipment for connecting to a Sonos ecosystem, allowing effortless setup and easy control with the Sonos app.

Why Connect Your Turntable To Sonos?

There are several reasons why you might want to connect your turntable to Sonos. First and foremost, it allows you to enjoy the warm, rich vinyl sounds in the same modern and convenient way as your digital music. With the ability to stream your music to speakers all over your home, all with the use of an app, you can easily integrate your vinyl collection into your Sonos system.

Additionally, if you have invested in high-quality third-party speakers for your turntable, connecting them to Sonos allows you to take advantage of the great sound quality that Sonos offers. This means that you can enjoy the full potential of your vinyl collection without sacrificing sound quality.

Furthermore, connecting your turntable to Sonos allows you to easily switch between your vinyl and digital music collections without having to switch out cables or components. With a turntable connected to Sonos, you can seamlessly transition from listening to your favorite vinyl record to streaming your favorite digital playlist with just a few taps on your smartphone.

What You Need To Connect Your Turntable To Sonos

To connect your turntable to Sonos, you will need a few things. First and foremost, you will need a fully functional turntable capable of playing the records you want to listen to. If your turntable does not have a built-in phono preamp, you will need to purchase one separately. The phono preamp’s job is to amplify the low-level “phono” level signal from your cartridge to a “line” level signal that will work with your speakers.

Next, you will need an RCA or RCA to 3.5mm cable, depending on which Sonos component you are using. Some Sonos products also require the use of a Sonos Line-In Adapter, which converts a 3.5mm connection to USB-C.

If you have a Sonos Amp, you can connect your turntable directly to it using the audio cable that comes with the Amp. Plug one end into the back of the turntable (or the preamp if it is not built-in) and the other end into the correct colors of the L/R audio inputs on the Sonos Amp. From there, you can connect your speakers to the Amp.

If you have a Bluetooth-enabled turntable, you can use the Sonos Roam to beam the audio to the rest of your system. However, it’s important to note that while you can connect the Move to a Bluetooth turntable and play audio, you won’t be able to group it with your other Sonos speakers (Wi-Fi-only) so that the vinyl audio is playing in a multi-room system.

If you’re using a Sonos component without any physical inputs, such as the Move, One, Play:1, Play:3, Beam, Playbar, or Playbase, you will need an additional Sonos device with a physical input such as a Five, Play:5, Connect, Amp, or Port to wirelessly transmit the signal from your turntable to additional Sonos speakers.

Option 1: Connect Your Turntable To A Sonos Port

The Sonos Port is another option for connecting your turntable to a Sonos system. The Port acts as a control tower for all the speakers within your home, unifying them onto the same network. It allows for endless possibilities for multi-room listening and provides the Sonos experience on your existing stereo, receiver, and turntable.

To connect your turntable to the Sonos Port, you will need an audio cable (not included with the Port) and a phono preamp. The phono preamp’s job is to amplify the low-level “phono” level signal from your cartridge to a “line” level signal that will work with your speakers. Once you have your preamp, plug one end of the audio cable into the back of the Sonos Port and connect the corresponding connectors into the turntable (or phono preamp) in the L/R inputs.

Next, play a record on your turntable and open the Sonos app. Select the settings and find the “Line-In” option. Connect this to the rest of your speakers (or the speakers you would like to use). Now, your turntable will be a part of the more extensive network of speakers in your home. The added benefit of this with your Sonos app is that instead of just one speaker playing your music, you can have the cumulative sound of all of them playing it!

It’s important to note that some Sonos speakers (like the Move, One, Play:1, Play:3, Beam, Playbar, or Playbase) don’t have any physical inputs. In this case, you won’t be able to connect your turntable directly to any of these models. Instead, you’ll need an additional Sonos device with a physical input such as a Five, Play:5, Connect, Amp, or Port to wirelessly transmit the signal from your turntable to additional Sonos speakers.

Option 2: Connect Your Turntable To A Sonos Amp

Another option for connecting your turntable to Sonos is by using a Sonos Amp. The Sonos Amp is a powerful amplifier that can be used to connect your turntable to other speakers in your home. To do this, you will need an RCA cable, which you can find on Amazon or at your local electronics store.

Begin by plugging one end of the RCA cable into the back of your turntable (or the turntable preamp if it doesn’t have one built-in) and the other end into the corresponding ports in the back of the Sonos Amp (IN). Once connected, place a record on your turntable and play it to test the connection.

Using the Sonos app, you can then connect the Amp to other speakers by going into the settings tab and looking for “Line In” devices. This will allow you to stream your vinyl audio to other Sonos speakers in your home.

It’s important to note that not all Sonos components have a line-in port, so make sure to check before purchasing. The Sonos Amp and Sonos Connect: Amp are two components that do have a line-in port and can be used to connect your turntable to your other speakers.

Option 3: Connect Your Turntable To A Sonos Five Or Play:5 Speaker

The Sonos Five and Play:5 speakers are the only Sonos components that come with an analog input, which makes it possible to physically connect them to a turntable using an RCA signal cable. To do this, you will need a phono preamp to amplify the low-level “phono” level signal from your cartridge to a “line” level signal that will work with your speakers. Once you have your preamp, simply plug the single end of an RCA Y-audio cable into the line-in port of your Sonos Five or Play:5 speaker, and attach the split cable to the corresponding colors of the L/R audio outputs on the back of your turntable.

If you have a turntable with a built-in preamp or an external preamp, you can also connect it to any Sonos device that has either a 3.5mm AUX jack or RCA input. For example, you can plug your turntable directly into the AUX input on the back of the Five or Play:5 speakers using an RCA to 3.5mm y-cable. You can also connect your turntable directly to the RCA inputs on the Sonos Port, Amp, Connect, or Connect:Amp using a standard RCA cable.

It’s important to note that some Sonos speakers, like the Move, One, Play:1, Play:3, Beam, Playbar, or Playbase, don’t have any physical inputs. If you want to connect your turntable to these models, you’ll need an additional Sonos device with a physical input such as a Five, Play:5, Connect, Amp, or Port to wirelessly transmit the signal from your turntable to additional Sonos speakers.

Tips For Getting The Best Sound Quality From Your Turntable And Sonos System

Connecting your turntable to a Sonos system can provide an excellent listening experience, but there are a few tips to keep in mind to ensure the best sound quality possible.

Firstly, it’s important to have a fully functional turntable with a built-in phono preamp. Without a preamp, the volume from your speakers will be far too low for you to enjoy your music. If your turntable doesn’t have a built-in preamp, you’ll need to purchase or source your own.

Next, ensure that you have the correct cables to connect your turntable to your Sonos component. Use the audio cable that comes with the Sonos Amp and plug one end into the back of the turntable (or the preamp if it’s not built-in) and the other end into the correct colors of the L/R audio inputs on the Sonos Amp. For other Sonos components, use a standard RCA cable.

It’s also important to choose the right Sonos component for your setup. The Sonos Five, Amp, and Port are all designed to work seamlessly with turntables, while other models like the One or Play:1 don’t have any physical inputs and won’t work with a turntable directly.

Finally, make sure that your turntable is positioned correctly and that you’re using high-quality speakers. The placement of your turntable can affect sound quality, so make sure it’s on a stable surface away from any sources of vibration or interference. High-quality speakers will also make a big difference in the overall sound quality of your system.

By following these tips, you can get the best possible sound quality from your turntable and Sonos system.