Are you a proud owner of a KD-2000 turntable?
Do you want to ensure that your records sound their best?
One important feature to understand is the anti-skate mechanism.
This small but crucial adjustment can make a big difference in the quality of your sound.
In this article, we’ll guide you through the process of adjusting the anti-skate on your KD-2000 turntable, so you can enjoy your vinyl collection to the fullest.
Whether you’re a seasoned audiophile or just starting out, this guide will help you get the most out of your turntable.
So, let’s get started!
How To Adjust Anti-Skate On KD-2000
Step 1: Set the Anti-Skate to Zero
Before adjusting the anti-skate on your KD-2000 turntable, make sure that the cartridge alignment and tracking force have been set correctly. Once you’ve done that, set the anti-skate to zero.
Step 2: Select a Record
Choose a record that you’re familiar with and that you know well. This will help you to hear any changes in sound quality as you adjust the anti-skate.
Step 3: Listen for Channel Imbalance
Play the record and listen carefully for any channel imbalance. If the left channel is louder than the right, or vice versa, this is a sign that the anti-skate needs adjusting.
Step 4: Adjust the Anti-Skate
Start by adjusting the anti-skate to the same value as the vertical tracking force (VTF) used. This will get you in the ballpark.
Listen carefully to the last few minutes of the record to determine if more or less anti-skate is needed. Listen for distortion, particularly in the form of sibilance, and determine if it appears to be louder on one channel than the other. Adjust the anti-skate value until the distortion is minimized.
Step 5: Check Across Different Points on the Record
Listen carefully at two or three different points across the record. If you used an alignment protractor to align your cartridge, listen at the alignment points. Listen for any differences in tone, dynamics, and soundstage at these points. If there are differences, some tweaking of the anti-skate adjustment may be needed.
Step 6: Contact Audio Solutions Department if Needed
If adjusting the anti-skate does not clear up a particular problem, there may be another reason for it. Contact our Audio Solutions Department for further advice.
Understanding Anti-Skate On KD-2000 Turntables
The anti-skate feature on a KD-2000 turntable is designed to prevent the tonearm from moving inward towards the center of the record as it approaches the end. This can cause distortion, uneven channel balance, and damage to both the stylus and the record itself.
Adjusting the anti-skate on a KD-2000 turntable is essential to maintain good sound quality and prolong the life of your records. To adjust the anti-skate, you need to start by setting it to zero. Then, choose a record that you know well and listen for any channel imbalance. If there is any imbalance, adjust the anti-skate to minimize it.
It’s important to listen carefully to the last few minutes of a record when adjusting the anti-skate, as this is where distortion is most likely to occur. Listen for sibilance and determine if it appears louder on one channel than the other. Adjust the anti-skate value until distortion is minimized.
Once you’ve adjusted the anti-skate, listen carefully at different points across the record. If there are differences in tone, dynamics, or soundstage at these points, some tweaking of the anti-skate adjustment may be needed.
If you’re having trouble adjusting the anti-skate on your KD-2000 turntable, contact our Audio Solutions Department for further advice. Remember that proper adjustment of the anti-skate is essential for maintaining good sound quality and prolonging the life of your records.
Tools And Materials Needed For Adjusting Anti-Skate
To adjust anti-skate on your KD-2000 turntable, you will need the following tools and materials:
1. Digital VTF gauge – This tool is used to measure the vertical tracking force of your cartridge. It can also be used to measure the anti-skate force.
2. Record – Choose a record that you’re familiar with and that you know well. This will help you to hear any changes in sound quality as you adjust the anti-skate.
3. Screwdriver – You may need a screwdriver to adjust the anti-skate knob on your turntable.
4. Alignment protractor – This tool is used to align your cartridge correctly. It may be necessary to use this tool if you notice any channel imbalance across different points on the record.
5. Patience – Adjusting anti-skate can be a time-consuming process, but it’s important to take your time and listen carefully to the changes in sound quality as you make adjustments.
By having these tools and materials on hand, you’ll be able to adjust the anti-skate on your KD-2000 turntable with ease and precision.
How To Adjust Anti-Skate On KD-2000 Turntables Step-by-Step
Adjusting the anti-skate on your KD-2000 turntable is an important step in maintaining good channel balance, minimizing distortion, and reducing stylus and record wear. Here’s a step-by-step guide on how to adjust the anti-skate on your KD-2000 turntable:
Step 1: Set the Anti-Skate to Zero
Before adjusting the anti-skate on your KD-2000 turntable, make sure that the cartridge alignment and tracking force have been set correctly. Once you’ve done that, set the anti-skate to zero.
Step 2: Select a Record
Choose a record that you’re familiar with and that you know well. This will help you to hear any changes in sound quality as you adjust the anti-skate.
Step 3: Listen for Channel Imbalance
Play the record and listen carefully for any channel imbalance. If the left channel is louder than the right, or vice versa, this is a sign that the anti-skate needs adjusting.
Step 4: Adjust the Anti-Skate
Start by adjusting the anti-skate to the same value as the vertical tracking force (VTF) used. This will get you in the ballpark.
Listen carefully to the last few minutes of the record to determine if more or less anti-skate is needed. Listen for distortion, particularly in the form of sibilance, and determine if it appears to be louder on one channel than the other. Adjust the anti-skate value until the distortion is minimized.
Step 5: Check Across Different Points on the Record
Listen carefully at two or three different points across the record. If you used an alignment protractor to align your cartridge, listen at the alignment points. Listen for any differences in tone, dynamics, and soundstage at these points. If there are differences, some tweaking of the anti-skate adjustment may be needed.
Step 6: Contact Audio Solutions Department if Needed
If adjusting the anti-skate does not clear up a particular problem, there may be another reason for it. Contact our Audio Solutions Department for further advice.
By following these steps, you can ensure that your KD-2000 turntable is properly adjusted for optimal sound quality and minimal wear on your records and stylus.
Testing Your Anti-Skate Adjustment
After adjusting the anti-skate on your KD-2000 turntable, it’s important to test whether it has been set correctly. Here are some steps to follow:
Step 1: Use an Anti-Skate Calibration Record
An anti-skate calibration record is a clear, grooveless 12″ record that helps you accurately adjust the anti-skate setting on your turntable. Place the record on your turntable, turn it on, and drop your needle in the center of the anti-skate calibration record.
Step 2: Observe Tonearm Movement
Observe the movement of the tonearm as it moves towards the spindle. You want the tonearm to move very slowly towards the spindle. Make sure you raise the arm before the stylus tip goes over any writing in the vinyl. All you need to do is slowly lower it onto the surface and raise it right away. As soon as it hits the record you will see the movement.
Step 3: Listen for Distortion
Use a pair of headphones to listen for distortion. You want any distortion ssssss-sound (from vocals) to be inside your head, perfectly in the middle of the sound stage and not to the left or right. If you hear distortion that is louder on one channel than the other, you may need to adjust the anti-skate further.
Step 4: Check Across Different Points on the Record
Listen carefully at two or three different points across the record. Listen for any differences in tone, dynamics, and soundstage at these points. If there are differences, some tweaking of the anti-skate adjustment may be needed.
Step 5: Repeat as Necessary
If you find that your anti-skate setting needs further adjustment after testing, repeat steps 2-4 until you achieve optimal results.
Remember that improper anti-skate settings can slowly damage your precious records as well as your styli. Testing your anti-skate adjustment regularly can help ensure that your turntable is functioning properly and that your records are being properly preserved.
Troubleshooting Common Anti-Skate Issues On KD-2000 Turntables
While adjusting the anti-skate on your KD-2000 turntable, you may encounter some common issues. Here are a few troubleshooting tips to help you get the best possible sound:
1. Skipping: If your stylus is skipping through the first few seconds of a track, it may be due to insufficient anti-skate. Increase the anti-skate value until the problem goes away.
2. Channel Imbalance: If you notice that one channel is louder than the other, it may be a sign that the anti-skate needs adjusting. Follow the steps outlined above to adjust it accordingly.
3. Distortion: If you hear distortion in the form of sibilance, adjust the anti-skate value until it is minimized. Be sure to listen carefully for any differences in distortion between channels.
4. Inconsistent Sound Quality: If you notice differences in tone, dynamics, or soundstage at different points on the record, some tweaking of the anti-skate adjustment may be needed. Try adjusting it slightly until you achieve consistent sound quality across the entire record.
If you still encounter issues after adjusting the anti-skate, there may be another problem with your turntable. Contact our Audio Solutions Department for further advice and troubleshooting.
Conclusion: Enjoying Your Vinyl Collection With Proper Anti-Skate Adjustment
Proper anti-skate adjustment is crucial for maintaining the quality of your vinyl collection. By balancing the forces of downforce and lateral tracking force, your stylus will remain centered in the record groove, minimizing distortion and reducing wear on both your records and stylus.
To enjoy your vinyl collection to the fullest, it’s important to regularly calibrate your tonearm and anti-skate. By following the steps outlined above, you can fine-tune your anti-skating mechanism to ensure that your records and equipment are in premium condition.
Remember to listen carefully for any channel imbalance or distortion, and adjust the anti-skate value accordingly. If you’re having trouble with a particular problem, don’t hesitate to contact our Audio Solutions Department for further advice. With proper anti-skate adjustment, you can enjoy the full richness and depth of your vinyl collection for years to come.
