Are you a vinyl enthusiast looking to upgrade your listening experience? The House of Marley Stir It Up wireless turntable might just be what you need.
With its switchable preamplifier and multiple connectivity options, this turntable is versatile enough to suit any setup. And now, with the added option of Bluetooth connectivity, you can easily connect it to your favorite wireless speakers or headphones.
In this article, we’ll guide you through the steps to connect your Marley turntable to Bluetooth speakers and help you get the most out of your vinyl collection.
So sit back, relax, and let’s get started!
How To Connect Marley Turntable To Bluetooth Speakers
Step 1: Set up your Marley turntable
Before you can connect your turntable to Bluetooth speakers, you need to set it up properly. Follow these steps:
– Unclip the tonearm and remove the protective foam block from underneath it.
– Carefully remove the protective cover from the stylus.
– Look at the belt underneath the metal platter and make sure it is not twisted.
– Place the platter on the base of the turntable and loop the belt around it.
– Place the turntable mat on the platter.
– Place the balance weight on the end of the tonearm and adjust it until the arm floats parallel with the turntable.
– Adjust the tracking weight on the balance to 2.5 and adjust the anti-skate dial to 2.5.
– Plug in the power cord and connect an RCA cable to your desired playback device.
Step 2: Turn on Bluetooth mode
To connect your Marley turntable to Bluetooth speakers, you need to turn on Bluetooth mode. Here’s how:
– Hold down the Bluetooth button on your turntable for 2 seconds until you see X2 (pairing mode) on your device.
Step 3: Pair with your Bluetooth speakers
Now that your turntable is in pairing mode, you can connect it to your Bluetooth speakers. Here’s how:
– Turn on your Bluetooth speakers and put them in pairing mode.
– Press the Bluetooth button on your turntable twice (once to activate, once to seek).
– Bring your Bluetooth device in pairing mode near to the turntable and let them connect.
Step 4: Enjoy your vinyl collection
Once your Marley turntable is connected to your Bluetooth speakers, you’re ready to enjoy your vinyl collection wirelessly. You can control volume using either the master Bluetooth volume knob on the turntable or on your speaker.
Understanding The House Of Marley Stir It Up Turntable
The House of Marley Stir It Up Turntable is a high-quality turntable that is built using eco-friendly materials. It features a switchable, integrated preamplifier with dual RCA output jacks, making it easy to connect to a PHONO input on an amplifier or receiver. However, for those who don’t have an amplifier or receiver, the turntable comes with a dual RCA to 3.5mm cable that can be used to plug into anything that has a 3.5mm AUX input, such as portable speakers and mini stereo systems.
The Stir It Up Wireless model also features Bluetooth connectivity, allowing users to connect to any wireless speakers with Bluetooth 4.2. Pairing is simple and easy, requiring users to press the adjacent Bluetooth button and the Bluetooth pairing button on their speaker. The units connect quickly and stay connected, although users should note that the turntable doesn’t automatically reconnect with the speakers when they are turned on. Instead, users will need to press the Bluetooth button on the turntable every time they want to use the speakers.
In addition to its various connectivity options, the Stir It Up Turntable also comes with a USB-B port on the back for direct connection to a PC should users want to digitize their records. There is also a 3.5mm headphone jack on the front for private listening.
Preparing Your Turntable For Bluetooth Connectivity
Before you can connect your Marley turntable to Bluetooth speakers, you need to make sure it is prepared for Bluetooth connectivity. Here are the steps you need to follow:
Step 1: Check for built-in preamp
Check if your Marley turntable has a built-in preamp. If it does, then you can skip to Step 2. If not, then you will need to connect an external preamp to your turntable.
Step 2: Get a Bluetooth transmitter
To transmit your turntable’s signal via Bluetooth, you will need a Bluetooth transmitter. You can find them online for prices starting at less than $20.
Step 3: Connect the transmitter
Connect the Bluetooth transmitter to your Marley turntable’s RCA output if it has a built-in preamp. If it doesn’t have a built-in preamp, connect the transmitter to the phono output on your external preamp.
Step 4: Pair with Bluetooth speakers
Once the transmitter is connected, you can pair your Marley turntable with any Bluetooth-connected speaker or amplifier. To do this, turn on your Bluetooth speakers and put them in pairing mode. Then, press the Bluetooth button on your turntable twice (once to activate, once to seek). Bring your Bluetooth device in pairing mode near to the turntable and let them connect.
Step 5: Enjoy your vinyl wirelessly
Now that your Marley turntable is connected to your Bluetooth speakers, you can enjoy listening to your vinyl collection wirelessly. Remember that while wireless speakers or headphones lack a phono preamp, they tend to be designed with higher-end components than traditional Bluetooth speakers. This means that there’s a better chance you’ll be able to enjoy some of what vinyl brings to the table.
Troubleshooting Common Bluetooth Connection Issues
Even though connecting your Marley turntable to Bluetooth speakers is a straightforward process, you may encounter some common Bluetooth connection issues. Here are some troubleshooting steps to try:
– Make sure your Bluetooth devices are within range: If your turntable and speakers are too far apart, they may not connect properly. Move them closer together and try again.
– Check if your devices are in pairing mode: Both your turntable and speakers need to be in pairing mode for them to connect. If either device is not in pairing mode, they won’t connect. Check the instructions for your specific devices to ensure they are both in pairing mode.
– Check if your devices support the same Bluetooth version: Bluetooth technology is backward compatible, but newer protocols like Bluetooth Smart may not sync up with older devices. Check your device manuals or information screens to ensure both devices support the same protocols.
– Reset your devices: If you’re having persistent Bluetooth connection problems, try resetting your turntable and speakers.
– “Forget” the connection on your phone or tablet: If you’ve previously connected your turntable to a device and are having trouble connecting it to a new device, try having the old device “forget” the connection.
By following these troubleshooting steps, you can easily fix any common Bluetooth connection issues you may encounter when connecting your Marley turntable to Bluetooth speakers.
Tips For Optimizing Your Vinyl Listening Experience With Bluetooth Speakers
To get the most out of your vinyl listening experience with Bluetooth speakers, consider these tips:
1. Choose high-quality Bluetooth speakers: To truly appreciate the nuances and warm sound of vinyl records, it’s important to have high-quality Bluetooth speakers that can reproduce the full range of frequencies. Look for speakers that have a frequency response range of at least 20Hz to 20kHz and a high signal-to-noise ratio.
2. Place your speakers in an optimal position: The placement of your Bluetooth speakers can greatly affect the sound quality. Ideally, your speakers should be placed at ear level and equidistant from each other to create a balanced stereo image. Avoid placing them too close to walls or corners, as this can cause unwanted reflections and bass buildup.
3. Use a record cleaning machine: As mentioned earlier, a clean record is essential for optimal sound quality. Consider investing in a record cleaning machine that uses specially-formulated cleaning fluid and vacuum suction to deep clean the grooves of your vinyl records.
4. Avoid wireless interference: Bluetooth speakers can be susceptible to interference from other wireless devices, such as Wi-Fi routers or microwaves. To avoid any potential interference, try to keep your Bluetooth speakers away from other wireless devices and minimize the number of active Bluetooth connections in the area.
5. Experiment with EQ settings: While mastering engineers aim for a neutral sound during the mastering process, each listening environment is unique and may require some EQ adjustments to optimize the sound. Experiment with different EQ settings on your Bluetooth speakers until you find a sound that you enjoy.
By following these tips, you can enhance your vinyl listening experience with Bluetooth speakers and enjoy your favorite records in high fidelity wirelessly.
