Are you a vinyl enthusiast looking to bring your record collection into the modern age? Look no further than the Sonos system.
With its sleek design and powerful sound, the Sonos Amp and Roam speakers are the perfect addition to any home audio setup. But how do you connect your Audio Technica turntable to your Sonos system?
Don’t worry, we’ve got you covered. In this article, we’ll walk you through the step-by-step process of connecting your turntable to your Sonos system, so you can start enjoying your favorite vinyl records in high-quality sound.
So grab your favorite LP and let’s get started!
How To Connect Audio Technica Turntable To Sonos
Step 1: Gather Your Materials
Before you begin, make sure you have all the necessary materials. You will need your Audio Technica turntable, a Sonos Amp or Roam speaker, and an audio cable that comes with the amp.
Step 2: Connect the Audio Cable
Take the audio cable that comes with the amp and plug one end into the back of the turntable (or the preamp, if it is not built-in) and the other end into the correct colors of the L/R audio inputs on the Sonos Amp.
Step 3: Connect Your Speakers
Now that your turntable is connected to your Sonos Amp, you can connect your speakers to the Amp. Simply follow the instructions provided with your Sonos speaker to connect it to your Amp.
Step 4: Pair Your Devices
To pair your Audio Technica turntable with your Sonos Roam speaker, follow these steps:
1. Press the Bluetooth button once on the back of the Roam to switch to Bluetooth Mode. The Roam will chime and the LED on top of the speaker will turn blue.
2. Press and hold the Bluetooth button to enable pairing mode. The Roam will chime again and the LED will flash blue.
3. Press the Wireless Function Button on the turntable to begin the pairing process. The LED will flash blue.
4. Press and hold the Wireless Function Button until the LED flashes red and blue. Release the button.
5. The LED will turn solid blue on both devices and you will hear a chime on the Roam when the connection is complete.
Step 5: Group Your Speakers
Once your vinyl audio is playing out of your Roam, you can group it with your other Sonos speakers in your home. Open the Sonos app, select the System tab (bottom center), and group your Roam with your other Sonos speakers. Audio will then play on all your Sonos speakers at once!
Gather Your Materials
Before you begin connecting your Audio Technica turntable to your Sonos system, it’s important to gather all the necessary materials. First, you will need your Audio Technica turntable, which may or may not have a built-in preamp. If it does not have a built-in preamp, you will need an external preamp to boost the signal from the turntable.
Next, you will need a Sonos Amp or Roam speaker. If you’re using a Sonos Amp, make sure you have the audio cable that comes with it. If you’re using a Sonos Roam, you can pair it with a Bluetooth turntable or use the new Victrola Stream Carbon turntable that connects to Wi-Fi and is natively discoverable in the Sonos app.
Finally, you will need an audio cable to connect your turntable to your Sonos system. Make sure the cable is long enough to reach from your turntable to your Sonos Amp or Roam speaker. Once you have all of these materials ready, you can move on to connecting your Audio Technica turntable to your Sonos system.
Setting Up Your Sonos System
Now that you have connected your Audio Technica turntable to your Sonos system, it’s time to set it up. Here are the steps to follow:
Step 1: Download the Sonos App
The first step is to download the Sonos app on your smartphone or tablet. The app is available for both iOS and Android devices, and can be downloaded from the respective app stores.
Step 2: Set Up Your Sonos System
Once you have downloaded the app, follow the instructions provided to set up your Sonos system. This will involve connecting your Sonos speakers to your Wi-Fi network and creating a Sonos account.
Step 3: Add Your Turntable to Your Sonos System
To add your turntable to your Sonos system, open the Sonos app and select “Settings” from the menu. From there, select “System” and then “Add Product”. Follow the instructions provided to add your turntable to your Sonos system.
Step 4: Configure Your Audio Settings
Once you have added your turntable to your Sonos system, you may need to configure your audio settings. This will depend on your specific setup and preferences. For example, you may want to adjust the bass or treble levels, or change the audio output format.
Step 5: Enjoy Your Vinyl Collection
With your Audio Technica turntable connected to your Sonos system, you can now enjoy your vinyl collection in high-quality audio. Simply select the turntable as the audio source in the Sonos app, and start playing your favorite records.
Preparing Your Audio Technica Turntable
Before connecting your Audio Technica turntable to your Sonos system, it’s essential to prepare the turntable properly. Here are some steps to follow:
Step 1: Level Your Turntable
It’s crucial to ensure that your turntable is level before playing any records. You can use a bubble level to check if the turntable is level. If it’s not, adjust the feet until it is.
Step 2: Set the Tracking Force
The tracking force is the amount of pressure exerted on the record by the stylus. Each cartridge has a recommended tracking force range, and it’s essential to set it correctly. Use a tracking force gauge to set the appropriate tracking force for your cartridge.
Step 3: Adjust the Anti-Skate
Anti-skate is a mechanism that prevents the tonearm from pulling towards the center of the record. It’s essential to adjust the anti-skate to match the tracking force. Use an anti-skate gauge to set it correctly.
Step 4: Set the Stylus Pressure
The stylus pressure is the amount of pressure exerted on the record by the stylus tip. It’s essential to set it correctly for optimal sound quality. Use a stylus pressure gauge to set it according to your cartridge’s recommended range.
Step 5: Check Your Connections
Before connecting your Audio Technica turntable to your Sonos system, double-check all connections are secure and free of any debris or dust that could affect sound quality. Make sure all cables are plugged in correctly and firmly.
Following these steps will ensure that your Audio Technica turntable is properly prepared for connection to your Sonos system, providing you with an exceptional vinyl listening experience.
Connecting Your Turntable To Your Sonos System
Are you a vinyl enthusiast looking to connect your Audio Technica turntable to your Sonos system? Look no further! Here’s a step-by-step guide on how to do just that.
Step 1: Gather Your Materials
Before you begin, make sure you have all the necessary materials. You will need your Audio Technica turntable, a Sonos Amp or Roam speaker, and an audio cable that comes with the amp.
Step 2: Connect the Audio Cable
Take the audio cable that comes with the amp and plug one end into the back of the turntable (or the preamp, if it is not built-in) and the other end into the correct colors of the L/R audio inputs on the Sonos Amp.
Step 3: Connect Your Speakers
Now that your turntable is connected to your Sonos Amp, you can connect your speakers to the Amp. Simply follow the instructions provided with your Sonos speaker to connect it to your Amp.
Step 4: Pair Your Devices
To pair your Audio Technica turntable with your Sonos Roam speaker, follow these steps:
1. Press the Bluetooth button once on the back of the Roam to switch to Bluetooth Mode. The Roam will chime and the LED on top of the speaker will turn blue.
2. Press and hold the Bluetooth button to enable pairing mode. The Roam will chime again and the LED will flash blue.
3. Press the Wireless Function Button on the turntable to begin the pairing process. The LED will flash blue.
4. Press and hold the Wireless Function Button until the LED flashes red and blue. Release the button.
5. The LED will turn solid blue on both devices and you will hear a chime on the Roam when the connection is complete.
Step 5: Group Your Speakers
Once your vinyl audio is playing out of your Roam, you can group it with your other Sonos speakers in your home. Open the Sonos app, select the System tab (bottom center), and group your Roam with your other Sonos speakers. Audio will then play on all your Sonos speakers at once!
With these simple steps, you can enjoy high-quality vinyl audio through your Sonos system. Happy listening!
Testing Your Setup And Enjoying Your Vinyl Records
Now that your Audio Technica turntable is connected to your Sonos system, it’s time to test your setup and enjoy your vinyl records.
Start by selecting the line-in input via the Sonos app, which should be labeled as “record player” or a name of your choice. Once you’ve selected the input, you can start playing your vinyl records.
It’s important to note that the Line-In Source Level settings in the Sonos app may need to be adjusted to get the volume to a level you’re happy with. By default, it’s set to 2, but you may need to test around the 6/7 mark. This will depend on your pre-amp’s output impedance, so it’s best to experiment with different levels until you find the right one.
Once you have the music playing through your Sonos speaker, you can adjust the volume using the Sonos app or the controls on your turntable. You can also adjust the equalizer settings in the Sonos app to fine-tune the sound quality.
If you have multiple Sonos speakers in your home, you can group them together using the Sonos app to create a multi-room audio experience. This allows you to listen to your vinyl records in different rooms of your home simultaneously.
Overall, connecting your Audio Technica turntable to your Sonos system is a simple process that allows you to enjoy high-quality audio from your vinyl records. With a little experimentation and fine-tuning, you can create an immersive audio experience that brings new life to your favorite albums.
