Are you a proud owner of an Audio Technica turntable but struggling to figure out how to turn it on?
Don’t worry, you’re not alone. Setting up a turntable can be a bit intimidating, especially if you’re new to the world of vinyl.
But fear not, we’ve got you covered. In this article, we’ll walk you through the steps to turn on your Audio Technica turntable and get it spinning in no time.
Whether you’re a seasoned vinyl enthusiast or just starting out, this guide will help you get the most out of your turntable and enjoy your favorite records with ease.
So let’s dive in and get started!
How To Turn On Audio Technica Turntable
Step 1: Unpack and Set Up
Before you can turn on your Audio Technica turntable, you need to make sure it’s properly set up. Remove any packaging materials and secure the tonearm to its rest with the locking clamp. Attach the headshell/cartridge assembly by inserting it into the socket at the end of the tonearm. Rotate the headshell locking ring counterclockwise to seat it in place and hand tighten the ring until snug.
Step 2: Connect Power
Once your turntable is set up, you’ll need to connect it to power. Plug the AC power cord into an outlet and connect it to your turntable.
Step 3: Turn On
Now that your turntable is connected to power, it’s time to turn it on. Locate the power switch on your turntable and flip it to the “on” position.
Step 4: Adjust Speed
Depending on the record you’re playing, you may need to adjust the speed of your turntable. Most Audio Technica turntables have a switch for selecting between 33-1/3 and 45 RPM speeds. Make sure you select the correct speed for your record before playing it.
Step 5: Place Record
With your turntable turned on and set to the correct speed, it’s time to place your record. Gently place your vinyl onto the platter, making sure it’s centered and secure.
Step 6: Start Playing
Once your record is in place, it’s time to start playing. Press the start button on your turntable and watch as your vinyl comes to life.
Congratulations! You’ve successfully turned on your Audio Technica turntable and are ready to enjoy all of your favorite records. Remember to always handle your vinyl with care and keep your turntable clean for optimal performance.
Checking The Power Source
One common issue that may prevent your Audio Technica turntable from turning on is a problem with the power source. If you’ve tried plugging it into different outlets and it still won’t turn on, there are a few things you can check.
First, make sure the fuse in the plug hasn’t burned out. You can do this by unplugging the turntable, removing the fuse from the plug, and inspecting it for any signs of damage or discoloration. If the fuse is blown, replace it with a new one of the same rating.
Next, check the power cable for any damage such as frayed wires or cuts. If you find any damage, replace the cable with a new one.
If neither of these steps solves the problem, it’s time to seek professional help. Find a qualified technician who can investigate and repair any issues with your turntable’s power source. It’s important to avoid attempting any repairs yourself unless you have proper training and experience, as this can be dangerous and may cause further damage to your turntable.
Plugging In The Turntable
To plug in your Audio Technica turntable, you’ll need to first connect the AC power adapter cable to the 12V DC power input jack on the rear of the turntable. Once connected, plug the adapter into a convenient AC outlet. Note that the main power switch is located on the rear of the turntable next to the power input jack and may be left in the on (pressed in) position.
Next, connect the provided dual RCA audio cable to the left and right output connectors on the turntable. The RCA cable’s red plug is the right (R) channel and the white plug is the left (L) channel. The turntable can provide either a traditional unequalized PHONO level output or an equalized LINE level output making it compatible with a variety of devices, including those with or without a dedicated PHONO input for a turntable.
Once you’ve plugged in your turntable and connected it to your audio system, you’re ready to start playing your favorite records. Remember to handle your vinyl with care and keep your turntable clean for optimal performance.
